Building a VeloMobile - Page 2 of 13


Figure 4

So with all of these goals in mind, the first choice becomes - delta, tadpole or quad?

The type of base vehicle will determine the overall shape of the body as well as its load carrying capabilities, handling characteristics and aerodynamic advantages. Choosing one of the three configurations was actually quite a chore as they all offered advantages and disadvantages when it came to costs, aesthetics, practicality, and ease of building. In the end, I decided that a delta trike would be the most practical base vehicle, but I will discuss all three possibilities, as well as their strengths and weaknesses.

A quadcycle or "quad" is a four wheeled bike with two front steering wheels and one or more rear drive wheels. The obvious advantage of such a vehicle is stability, since it has four points on the road at all times. My initial idea was to start with a quadcycle like our StreetFighter and just bring up the seat height and overall track width a little more for visibility and stability. I had a lot of fun carving up the corners in the StreetFighter, and knew that it to be a very robust and stable vehicle for just about any kind of riding and terrain. But, after giving more consideration of the goals for this project, it became apparent that there would be no real advantage to having two wheels at the front and a quad configuration would make using an electric assist hub motor impossible. So, the quadcycle idea was abandoned in favor of a trike, which now left only two choices: delta or tadpole configuration.

Figure 5

Two wheels in front - The Tadpole Trike

A tadpole style trike places the two steering wheels in front beside the pilot and places the single drive wheel at the rear behind the pilot. This type of trike offers great handling and allows for the use of mostly standard bicycle components in the rear end and transmission system. As for aerodynamics, a tadpole trike is better than a delta trike because a teardrop body shape can be used, which places the tapered end at the rear of the vehicle for optimal travel through the air. Another nice thing about the tadpole trike configuration is that a full fairing looks nice as it wraps around the pilot, leaving the large end in the front with plenty of room to install a full view windshield. Most of these advantages are more aligned to a vehicle designed for looks and speed, and not so much to a practical velomobile designed for everyday use and cargo carrying. A teardrop shape leaves almost no room in the rear for a cargo area, and although rear hub motors area available, they are less common and more expensive. This leaves only one other configuration to examine, the delta trike.

Figure 6

Two wheels in the rear - The Delta Trike

A delta style trike placed one or more drive wheels behind the pilot and has a single front steering wheel ahead of the pilot. This type of trike offers stable handling using standard bicycle components in the steering system and a great deal of cargo carrying ability. Having the wider end placed at the rear of the vehicle means that a delta configuration is less aerodynamic than a tadpole configuration, but this is hardly noticeable at the typical riding speeds that will be seen in city traffic. For a racing vehicle designed for optimal speed, this teardrop shape is the ultimate design factor, but for a utility vehicle, it will be of little concern. Having the load bearing wheels and drive system at the rear where the pilot sits is a great advantage of the delta configuration because it will offer the most traction and braking possible as well as keeping the load centered between two wheels. Since there is nothing except for the single front wheel and pilot's feet at the front of the vehicle, the body shape can taper towards the front and keep the total volume much lower than that of a quadcycle configuration. A delta trike is also the most robust of the three possible configurations because it uses standard bicycle components in the steering system with axles and industrial grade bearings in the rear. Having a standard set of bicycle forks in the front means that a commonly available electric hub motor kit can be easily installed to offer an electric assist drive.

So, it became obvious that a delta trike would offer the best base vehicle to use for a practical velomobile with load carrying capacity and an electric assist dive. Making the final decision on the base vehicle meant that I could now come up with my wish list of other features I wanted to have in my practical velomobile, which would include rear suspension, dual disc brakes, a suspended cargo bay, over-seat steering, long range electric drive, a trailer hitch, a head light, turn signals, rear view mirrors, and of course a full body with easy access when getting in or out. All of these features would be easy to integrate into a delta trike design.

Since winter has now set in around here and I normally work outdoors, I plan to build myself a velomobile in what would be considered reverse order - making the body first and then building the base trike to fit into the body. Typically, I'd build a body over a trike, but since I have to work indoors for the next six months and I already have a trike to use as a reference (my Aurora Delta Trike), I feel confident that this order of operations will turn out fine. The Aurora trike already has most of the features I want such as rear suspension and dual disc brakes. I only need to decide on a seat height and track width to use in the final design.

Figure 7

For my practical velomobile, I want a slightly higher seat height (similar to a car) for optimal visibility in traffic as well as a slightly wider track width for cornering stability and increased cargo capacity. Other than those changes, the Aurora trike is a good fit with its rear suspension, a recumbent seating position, and a robust transmission system. I'm able to remove the rear suspension spring and simply prop up the rear of the trike to the height I want, so now I have a base vehicle that can be used to take measurements and work out the size and shape of the body. Using a few photos taken from the side, I can make several mock-ups in Photoshop to help me decide on a general shape of the body.

Figure 8

With a base vehicle to take measurements from and a clear set of design goals, I can concentrate on the side profile of the body, which will involve some practical thinking as well as artistic abilities. The final design will become a combination of both aesthetics and ergonomics, allowing the rider to get in and out of the vehicle easily, while maintaining a sleek modern look with pleasing curves and proportions. Some of the other factors that will influence the final design will be the type and strength of the materials used, plus costs and complexity.

Viewing Page 2 of 13

You can build it yourself from our easy to follow DIY plans!