Search results

  1. DougMorency

    P-38 Drop Tank Dimensions - velomobile body

    Here is a site that you can by premade bodies for lake racers. I am using the measurements to work on the buck for my velomobile motorcycle project. P-38 Belly Tanks
  2. DougMorency

    chassis ideas for a velomobile

    I just wanted to stoke some imagination here. If you are going to build a velomobile or a trike, look the suspension setups on the Peel Trident and the Peel P50 micro cars. Peel Trident Pictures Peel P50 Pictures I hope this opens some design ideas
  3. DougMorency

    Tadpole trike hubs.

    Brad, have you thought of designing hubs for trikes that can use bottom brackets as the hub and bearings, might support more weight the the standard hubs. the square one would just need spoke flanges to be welded on and the square taper could be cut into a square hole on mounting flange on...
  4. DougMorency

    Mid drive I built 14 years ago.

    here is a mid drive that I built 14 years ago for my low racer To Build my mid drive I took one of the following free hub (the left 2 should work). 1) I removed the internal locking sprags for it. 2) I then took the cassette and file out the small splines on the cassette sprockets...
Top