Anyone know where I can buy these ? [ prefer in UK ]

Joined
Feb 7, 2008
Messages
4,575
Location
Nottinghamshire England
Hi all

I have bough elastomers in the past that look like this :-


On one side they have a metal plate with a recessed threaded hole and the other side a metal plate with a screw thread.



However I may need some like this.
A hole straight through and no metal plates either side :-

80 to 120 kg 55mm x 40mm M8 hole
or maybe
60 to 80 kg 45mm x 35mm M8 hole

I am struggling to find a UK supplier

Paul
 
Last edited:
Joined
Mar 2, 2022
Messages
124
Location
Nottinghamshire. UK
Should be easy to make for yourself, if you can't obtain as above. Trial and error should be easy.
Ok not for everyone, some people can't mix two ingredients into a mould, or make moulds!

Also reference: ROCK SHOX Judy XC Elastomer Springs Damper Repro Suspension Fork Cult Set Retro on Ebay.
The elastomers have a SHORE hardness of 50A. In my experience, they are therefore suitable for all drivers with a body weight of approx. 60 - 110 kilograms.

Made my own stuff with polyurethane 2 part mix rubbery parts and also spray paint protection of parts bungs, similar item as you require but not considered weight wise.
https://www.benam.co.uk/reoflex-50 example supplier there will be others.

Also slightly different
(trying to find a silicon rubber type)

Martin
Happy hunting.
 
Last edited:
Joined
Feb 7, 2008
Messages
4,575
Location
Nottinghamshire England
Martin

Thanks will investigate your links/ideas.

Paul
 
Top